天阔PC服务器 SCO UNIX openserver 5.0.5 安装说明-Ultra160 SC·百家电脑学院

1、从 www.dawning.com.cn 下载驱动程序

2、更改IDE-CDROM 设置，将CDROM 跳线设为 MASTER，将CDROM IDE线接到 IDE 1 口。
Installing SCO OpenServer 5.0.5
Follow these instructions only if you are installing
SCO OpenServer 5.0.5 for the first time.
Note: Remember that UNIX commands are case sensitive.
Enter the commands exactly as shown in the instructions.

1 Insert the SCO OpenServer 5.0.5 boot disk into the primary
floppy disk drive and turn ON the computer. Alternatively,
insert the SCO OpenServer 5.0.5 boot CD into the primary CD-ROM
drive and turn ON the computer.

2 When you see these prompts:
SCO OpenServer (TM) Release 5 Boot:
Type ahslink and press Enter.

3 Type ad160 as the package you want to link to the system and
press Enter.

4 Insert the requested volume (the Ultra160 Family Manager Set
disk for SCO UNIX) in the floppy disk drive and press Enter.
5 If the driver is properly loaded, the following message appears:
ad160.ad160:Loading module
fd(52)/ad160/driver/ad160/Driver.o text............
ad160: Driver "ad160" successfully loaded.

6 Follow the procedures in your SCO UNIX documentation for
completing the installation.